| Please browse this site for some answers to commonly asked questions. If you do not find the information you're looking for, please contact us at cdnsales@niccates.com
Maibec Q & A
Is strapping required for Maibec Siding?
Yes, strapping is required to validate the Maibec warranties.
For more information, please visit the Maibec website.
How many nails do I need for my Maibec Siding?
If you are using a 1x6 profile, you will need 10 lbs./1000 board feet - or 10 lbs./2000 lineal feet.
For 1x8 & 1x10 profiles, you need 15 lbs./1000 board feet.
You will need 1 pound of 3" nails per 170' of battens.
What are N&C's standard colours?
We stock six standard colours. They are:
Ultra White, Foliage Green, Ocean Grey, Sandstone Beige, Sky Blue, Walnut Brown.
What are N&C's standard profiles?
We stock six standard profiles. They are:
1x6 Cove, 1x6 V-Joint, 1x6 Rabbeted Bevel, 1x6 Channel, 1x8 Channel, 1x10 Board & Batten.
How do I figure square foot coverage?
If you are using a 1x6 profile; take your square footage; multiply by 1.26 to get board footage.
To find lineal footage, divide by 0.5
E.g. 1000 square feet of coverage would be 1260 fbm, and 2520'
If you are using a 1x8 profile; take your square footage; multiply by 1.23 to get board footage.
To find lineal footage, divide by 0.666
E.g. 1000 square feet of coverage would be 1230 fbm, and 1845'
If you are using a 1x10 profile; take your square footage; multiply by 1.1 to get board footage.
To find lineal footage, divide by 0.833
E.g. 1000 square feet of coverage would be 1100 fbm, and 1320'
If you are using a 1x4 profile; take your square footage; multiply by 1.45 to get board footage.
To find lineal footage, divide by 0.3334
E.g. 1000 square feet of coverage would be 1450 fbm, and 4350'
How long will my order take to arrive at the job site?
There are several factors to consider; the size of the job, whether the colour and profile are stocked or not; and location to be shipped. Contact us for information.
What special-colour choices do I have for Maibec Siding?
You can choose from over 75 colours on the Cabot colour chart. We just need to know the name and colour code, and whether the colour is solid or semi-transparent.
What warranties does Maibec Factory Stained Siding come with?
When you follow the installation instructions you get:
For solid colours, 30 years on wood fibres, 15 years on the stain (5 years on stain labour).
For semi-transparent colours, 30 years on wood fibres, 5 years on stain (20 months on stain labour).
See the Maibec website for more information.
Do you supply caulking?
We do not supply caulking. We do however, have colour-matched touch-up stain, which can be applied over paintable caulking for a consistent appearance.
Trex Q & A
Does Trex require gapping?
Yes. Trex is half plastic, half wood, and therefore expands and contracts under different temperatures. Gapping is also important to allow water run-off. For width to width gap, 1/4" is required. For cold weather installations, 3/8" is recommended.
For end to end gap allow 1/16" for every 20°F difference between installation temperature and the highest temperature expected during the year.
What is Trex made from?
Trex is a composite of reclaimed and recycled wood, and low-polyethylene plastic such as that found in grocery bags. It is heated, moulded and extruded.
Is Trex structural?
No. Because of its properties, Trex is intended solely for decking and railing. Do not use Trex for posts, beams, stringers or joists.
For more information, please visit the Trex Decking website.
For Questions about Cabot Products visit their website at www.cabotstains.com.
Other Common Questions
How many bundles are in a square of shakes/shingles?
One square (100 square feet coverage) of shingles has 4 bundles; therefore, each bundle covers 25 square feet.
One square of shakes has 5 bundles, each covering 20 square feet.
Where is your lumber distribution centre? Can I pick up my order?
Our lumber distribution centre is located in Caledonia, Ontario. Retailers may pick up orders with advance notice between the hours of 9am and 3pm Monday-Friday.
|
